Best Way To Clean Walls

Best way to clean walls

Best Way To Clean Walls In Commercial Facilities – A Step-By-Step Guide

Ever wondered what is the best way to clean walls of a commercial facility? This isn’t something that many people think about when they imagine cleaning a commercial facility. But wall cleaning is a significant part of the process.

The walls often bear the brunt of everyday activities. In a factory or warehouse setting, the walls accumulate:

  • Dust
  • Dirt
  • Stains

…and many other contaminants fairly easily. Dirty walls can negatively affect the look and feel of the facility. In commercial facilities where impressions matter a lot, keeping the walls clean is necessary.

Let’s find out what commercial cleaners do to keep the walls of a facility spotless.

Best Way To Clean Walls – General Guidelines To Follow

Wall cleaning is a complex process. It involves several steps. Commercial cleaners use various tools and equipment to perform this task effectively. Even the cleaning method varies depending on the type of wall and its condition.

The specific steps involved in wall cleaning may differ. But there are some general guidelines that cleaners follow for all facilities. Let’s take a look at a few of these for starters:

Preparation

Professional cleaners begin any cleaning job with a meticulous assessment of the site. So, you should thoroughly inspect the wall surface. You need to pay attention to aspects like:

  • What the walls are made of.
  • Whether they are painted, tiled, or wallpapered.
  • If they are damaged or cracked.

Once you have a full picture of the overall condition, it’s time to create the cleaning strategy. In this stage, professional cleaners will determine what type of cleaning method and equipment they will use.

Gather The Right Supplies

Without the appropriate supplies, cleaning the walls of a commercial property will feel like an impossible task. The best part about hiring professional cleaners for commercial cleaning is that they bring their own cleaning tools and supplies.

That way, you don’t have to worry about buying them yourself. But if you are planning to clean the walls on your own, make sure you have the following items handy:

  • Microfibre cloths
  • Sponges
  • Soft-bristle brushes
  • Buckets
  • Spray bottles
  • Ladders or scaffolding
  • Personal protective equipment

You should also set up warning signs or barriers to inform others of the cleaning activity. When using chemical cleaners, make sure there is proper ventilation. Use safety gear or harnesses when using ladders or scaffolding.

Ask Experts To Clean Walls In Your Commercial Space

Remove Dust And Debris

You can use microfibre cloths or dusters to remove loose dirt and debris. Start from the top of the wall and work your way down. This way, you can avoid spreading dust. Use extendable dusters to clean the high and hard-to-reach areas.

Spot Clean Areas With Stains

Next, you need to deal with spots and stains. First, you need to identify what type of stain it is. In a commercial facility, the walls can be stained with various elements such as:

  • Dirt
  • Ink
  • Grease
  • Coffee

You can buy stain removers that are specifically designed to get rid of various types of stains on different surfaces.

Use green cleaning products is the better option. You can make your own by using common ingredients. For instance, you can use a mixture of water and vinegar to remove stains from painted surfaces. To remove stains from wallpapers, use a dry sponge and cleaning solution.

Overall Cleaning Of The Walls

For most commercial walls that do not have wallpaper, wet cleaning is the best option. It effectively removes dirt and stains. For this, you need to mix a mild detergent in warm water. Dip a cloth or sponge into the solution and wring it out well.

Start gently scrubbing the walls. Clean the wall in sections. Start from the top and move your way downward. Rinse the cloth or sponge frequently. Make sure to change the cleaning solution if you notice it getting muddy.

If the wall is covered in wallpaper, you need to use dry cleaning. For this, you can use dry sponges or cleaning pads and wallpaper cleaners. Use gentle motions so as not to damage the delicate surface.

Final Inspection

Once you are satisfied with the cleaning, conduct a final inspection. Check if you have missed any spots. Make sure you have good lighting to thoroughly inspect the walls. Touch up areas that might need a bit more cleaning.

Lastly, wipe down the walls with a dry microfibre cloth. Removing excess moisture right away is a good way to prevent streaks and spots. You should also make sure the wall dries off properly to prevent mould growth.

These general guidelines are used by commercial cleaners everywhere. By following these steps, you can maintain immaculate walls in your facility. Make sure to adopt a consistent cleaning routine. With walls, a periodic commercial cleaning schedule will be sufficient.

How to clean your walls

How To Clean Your Walls In Specific Commercial Facilities?

Different commercial facilities present unique challenges when it comes to wall cleaning. Let’s talk about the top 3 commercial facilities that require frequent wall cleaning. We will also discuss how you should do it.

Offices

Surface Types Commonly Found: Painted drywall, glass partitions, wallpaper.

In corporate offices, the walls can get dirty over time. Fingerprints and smudges are also common around high-touch areas. In severe cases, there may even be ink or coffee stains on the walls.

To maintain a professional image and spotless work environment, periodic wall cleaning is necessary. For an effective cleanup, you need to:

  • Remove surface-level dust
  • Spot-clean to remove stains
  • Use wet or dry cleaning methods for overall cleaning

Warehouses And Industrial Places

Surface Types Commonly Found: Concrete, cinder block, metal.

Industrial facilities gather a significant amount of dirt and grime. In manufacturing units, the walls can have a buildup of grease. That’s why these facilities require more frequent and vigorous wall cleaning. For effective cleanup, you need to:

  • Use heavy-duty vacuums with brush attachments for dusting.
  • Apply industrial-grade cleaners to remove grease marks.
  • Power wash walls for overall deep cleaning.
  • Properly dry the walls.

Medical And Healthcare Centres

Surface Types Commonly Found: Antimicrobial paint, tile, vinyl.

Medical facilities demand the highest standards of cleanliness. The walls of a medical facility may be contaminated with bodily fluids and medical substances. That’s why they need frequent cleaning and disinfection. For a comprehensive medical cleaning, you need to:

  • Thoroughly remove dust using a vacuum or microfibre cloth.
  • Use hospital-grade cleaners for spot cleaning.
  • Regularly wipe down walls with disinfectant.

For a thorough commercial cleaning, check out JBN Cleaning.

Contact Us To Clean Walls In Your Business Premises


Get a free quote

JBN Cleaning

Get a free quote

Get a free quote

Get a free quote